AND Weighing > Industrial Scales

AND-4328 Digital Scale Indicator  Price: $392 TB:163 AC Adapter (120V), Add $37 TB:164 AC Adapter (220V), Add $47 AD-4328-10 Indicator Stand, Add $56 NOTE: Only one output can be selected from below: AD-4328-01 BCD Output (Open Collector), Add $60 AD-4328-02 Comparator Output (Open Collector), Add $190 AD-4328-03 RS-422/485 Serial Interface with Comparator (Open Collector), Add $190 AD-4328-04 20mA Output & Comparator (Relays, 50VDC/100mA), Add $116   Shipping Weight: 10 lbs

The AD-4328 indicators provide power and fleibility at an affordable price. They perform in a wide range of applications from batching to simple weighing. They are reliable, accurate, and easy to install

• lb/kg Switching
• Acccumulative data is stored in memory automatically or manually
• Comparator output to optional relays (Hi/OK/Lo)
• Setpoint comparison for batching applications
• Powered through AC adaptor or external DC (6 to 12V) power supply
• Standard serial output for printers, external displays, etc.
• Front panel protected to IP-65
• Powers up to 6 load cells at 350 ohms
• Gravity Compensation Function
• Optional bi-directional RS-232C, RS-422, RS-485 interfaces and BCD
• Averaging time and width can be selected for various applications
• Digitallly span calibrated by entering a sensor output voltage through the keypad
• 1/10,000 displayed resolution
• Mount on panel, column, stand or desktop
• Can be controlled by external input
• Enter predetermined tare weight from keypad
• RFI/EMI protected
• Meets or exceeds OIML Class III specifications (10,000d)
• RS-232C standard
• 2 year warranty

Rear Panel View I/O terminals are screw type for easy maintenance AC/DC selectable When connected to both AC & DC, priority is tiven to AC Remote operation of front keys Terminal Locations Option installation Load cell connection terminals AC adapter connector DC input terminals External front panel switch control Standard serial output

Specifications

Analog Input and A/D Conversion
Load cell excitation	5 VDC ±5%
Input Sensitivity	0.2µ V/D (min)
Input Signal Range	-1mV ~ +15mV
Load Cell Drive Capacity	up to 6 load cells at 350 ohms/load cell (max 90mA)
Zero Temperature coefficient	Zero (0.02µ V + 0.0008% dead load)/°C TYP Span 8ppm/°C of reading TYP
Span Temperature coefficient	±8ppm/°C reading (typ)
Non-Linearity	0.01% of full scale
Input Impedance	10M ohms minimum
Input noise	±0.2µ Vp-p
A/D Conversion Method	Integrating dual-slope type
A/D Resolution	40,000 counts (maximum)
A/D Conversion Rate	approximately 10 times/second

Digital Section
Weight Display	0.56" (14.2 mm), 6 digits, LED
Display Resolution	20,000 counts (max)
Minimum Division	times x1, x2, x5, x10, x20, x50
Maximum Display	500000
Under ZERO Indication	"-" minus display
Annunciators	ZERO, MD, GROSS, NET, PRESET TARE, kg/t or kg/lb
Keys	STANDBY/OPERATE, NET/GROSS, PRESET TARE, ZERO, M+, TARE, MODE, PRINT

General
Power	DC 9V (AC adapter or direct input to the terminal)
Battery Life	Approximately 160 hours with alkaline type cells
Operating temperature range	-10°C - 40°C (14°F - 104°F)
Storage temperature range	-10°C - 70°C (14°F - 158°F)
Weight	approximately 1.8 lbs (0.8 kg)
Dimensions	170 w x 126 d x 130 h